INFO: Preloader serial: 2NOTICE: BL31: v2.3():v2.3-868-g040d2de11:derrick.huang, fwver: v1.48NOTICE: BL31: Built : 15:02:44, Dec 19 2024INFO: spec: 0xaINFO: code: 0x88INFO: ext 32k is not validINFO: ddr: stride-en 4CHINFO: GICv3 without legacy support detected.INFO: ARM GICv3 driver initialized in EL3INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0INFO: l3 cache partition cfg-0INFO: system boots from cpu-hwid-0INFO: bypass memory repairINFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001INFO: dfs DDR fsp_params[0].freq_mhz= 2400MHzINFO: dfs DDR fsp_params[1].freq_mhz= 534MHzINFO: dfs DDR fsp_params[2].freq_mhz= 1320MHzINFO: dfs DDR fsp_params[3].freq_mhz= 1968MHzINFO: BL31: Initialising Exception Handling FrameworkINFO: BL31: Initializing runtime servicesINFO: BL31: Initializing BL32I/TC: I/TC: OP-TEE version: 3.13.0-898-g57604957e #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Fri Nov 15 16:04:27 CST 2024 aarch64, fwver: v1.19 I/TC: OP-TEE memory: TEEOS 0x200000 TA 0xc00000 SHM 0x200000I/TC: Primary CPU initializingI/TC: Primary CPU switching to normal world bootINFO: BL31: Preparing for EL3 exit to normal worldINFO: Entry point address = 0x200000INFO: SPSR = 0x3c9U-Boot 2017.09 (Mar 06 2026 - 17:56:27 +0800)Model: Rockchip RK3588 Evaluation BoardMPIDR: 0x0PreSerial: 2, raw, 0xfeb50000DRAM: 8 GiBSysmem: initRelocation Offset: eda0d000Relocation fdt: eb9fa120 - eb9fece0CR: M/C/IAuthor: Bull-man (wechat 1150185019)Using default environmentoptee api revision: 2.0clk_set_default_parents: could not read assigned-clock-parents for clock-controller@fd7c0000 rk3588_clk_set_rate: clk->id = 314 , rate = 200000000 mmc@fe2c0000: 1, mmc@fe2e0000: 0 rk3588_clk_set_rate: clk->id = 314 , rate = 400000 rk3588_clk_set_rate: clk->id = 314 , rate = 400000 rk3588_clk_set_rate: clk->id = 314 , rate = 400000 rk3588_clk_set_rate: clk->id = 314 , rate = 52000000 rk3588_clk_set_rate: clk->id = 314 , rate = 52000000 rk3588_clk_set_rate: clk->id = 314 , rate = 52000000 rk3588_clk_set_rate: clk->id = 314 , rate = 52000000 rk3588_clk_set_rate: clk->id = 314 , rate = 52000000 rk3588_clk_set_rate: clk->id = 314 , rate = 200000000 Bootdev(atags): mmc 0MMC0: HS400 Enhanced Strobe, 200MhzPartType: EFIA/B-slot: _a, successful: 0, tries-remain: 4TEEC: Waring: Could not find security partitionDM: v2RESC: 'boot_a', blk@0x000190e8lib/avb/libavb_user/avb_ops_user.c: trusty_read_lock_state failedError determining whether device is unlocked.Device is: UNLOCKEDDTB: rk-kernel.dtbHASH(c): OKboot mode: Noneusb dr_mode not foundusb dr_mode not foundusb dr_mode not foundclk_set_default_parents: could not read assigned-clock-parents for clock-controller@fd7c0000 rk3588_clk_set_rate: clk->id = 9 , rate = 1100000000 rk3588_clk_set_rate: clk->id = 5 , rate = 786432000 rk3588_clk_set_rate: clk->id = 8 , rate = 850000000 rk3588_clk_set_rate: clk->id = 7 , rate = 1188000000 rk3588_clk_set_rate: clk->id = 216 , rate = 702000000 rk3588_clk_set_rate: clk->id = 218 , rate = 400000000 rk3588_clk_set_rate: clk->id = 217 , rate = 500000000 rk3588_clk_set_rate: clk->id = 270 , rate = 800000000 rk3588_clk_set_rate: clk->id = 271 , rate = 100000000 rk3588_clk_set_rate: clk->id = 272 , rate = 400000000 rk3588_clk_set_rate: clk->id = 665 , rate = 100000000 clk_set_default_rates: failed to set rate 100000000 on clock 10 for clock-controller@fd7c0000 rk3588_clk_set_rate: clk->id = 666 , rate = 200000000 clk_set_default_rates: failed to set rate 200000000 on clock 11 for clock-controller@fd7c0000 rk3588_clk_set_rate: clk->id = 624 , rate = 800000000 rk3588_clk_set_rate: clk->id = 123 , rate = 375000000 clk_set_default_rates: failed to set rate 375000000 on clock 13 for clock-controller@fd7c0000 rk3588_clk_set_rate: clk->id = 236 , rate = 150000000 clk_set_default_rates: failed to set rate 150000000 on clock 14 for clock-controller@fd7c0000 rk3588_clk_set_rate: clk->id = 276 , rate = 200000000 clk_set_default_rates: failed to set rate 200000000 on clock 15 for clock-controller@fd7c0000I2c0 speed: 100000Hzvsel-gpios- not found!en-gpios- not found!vdd_cpu_big0_s0 800000 uVvsel-gpios- not found!en-gpios- not found!vdd_cpu_big1_s0 800000 uVI2c1 speed: 100000Hzvsel-gpios- not found!en-gpios- not found!vdd_npu_s0 800000 uV rk3588_clk_set_rate: clk->id = 165 , rate = 198000000 spi2: RK806: 2ON=0x30, OFF=0x02vdd_gpu_s0 750000 uVvdd_cpu_lit_s0 750000 uVvdd_log_s0 750000 uVvdd_vdenc_s0 init 750000 uVvdd_ddr_s0 850000 uVDevice 'gpio@fd8a0000': seq 0 is in use by 'gpio@fd8a0000'Device 'gpio@fec20000': seq 1 is in use by 'gpio@fd8a0000'=== Reading ADC Channel 5 === rk3588_clk_set_rate: clk->id = 157 , rate = 1000000 ADC Channel 5 raw value: 375flag_ver =1 ...ret = 375reset SF2507 ...OK clk_set_default_parents: could not read assigned-clock-parents for vop@fdd90000clk_set_default_parents: could not read assigned-clock-parents for port@0clk_set_default_parents: could not read assigned-clock-parents for port@1clk_set_default_parents: could not read assigned-clock-parents for port@3get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dtsget vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dtsget vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dtsget vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dtsrockchip_dw_hdmi_qp_probe: can't get link_clkWarn: can't find connect driverWarn: can't get connect driverCould not find baseparameter partitionModel: RK3588-xwbox for Bull-manMinidump: init...Rockchip UBOOT DRM driver version: v1.0.1vp0 have layer nr:2[0 2 ], primary plane: 2vp1 have layer nr:2[1 3 ], primary plane: 3vp2 have layer nr:2[6 8 ], primary plane: 8vp3 have layer nr:2[7 9 ], primary plane: 9Using display timing dtsdsi@fde30000: detailed mode clock 69300 kHz, flags[a] H: 1280 1340 1348 1408 V: 0800 0808 0814 0820bus_format: 100eVOP update mode to: 1280x800p60, type: MIPI1 for VP3 rk3588_clk_set_rate: clk->id = 631 , rate = 69300000 VP3 set crtc_clock to 68182KHzUnsupported bt709f at 10bit csc depth, use bt601f insteadVOP VP3 enable Esmart3[654x270->654x270@313x265] fmt[0] addr[0xedf00000]final DSI-Link bandwidth: 520000 Kbps x 4CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) b0pll 24000 KHz b1pll 24000 KHz lpll 24000 KHz v0pll 24000 KHz aupll 786431 KHz cpll 1500000 KHz gpll 1188000 KHz npll 850000 KHz ppll 1100000 KHz aclk_center_root 702000 KHz pclk_center_root 100000 KHz hclk_center_root 396000 KHz aclk_center_low_root 500000 KHz aclk_top_root 594000 KHz pclk_top_root 100000 KHz aclk_low_top_root 396000 KHzNet: clk_set_default_parents: could not read assigned-clock-parents for ethernet@fe1c0000 rk3588_clk_set_rate: clk->id = 324 , rate = 125000000 FEC: can't find phy-handleeth1: ethernet@fe1c0000clk_set_default_parents: could not read assigned-clock-parents for ethernet@fe1b0000 rk3588_clk_set_rate: clk->id = 324 , rate = 125000000 FEC: can't find phy-handle, eth0: ethernet@fe1b0000I2c5 speed: 100000HzHit key to stop autoboot('CTRL+C'): 0 ANDROID: reboot reason: "(none)"Not AVB images, AVB skipANDROID: sha1(7446d9278b...) + OKBooting IMAGE kernel at 0x00400000 with fdt at 0x08300000...Fdt Ramdisk skip relocation## Booting Android Image at 0x003ff800 ...Kernel: 0x00400000 - 0x0221c008 (30833 KiB)## Flattened Device Tree blob at 0x08300000 Booting using the fdt blob at 0x08300000 XIP Kernel Image from 0x00400000 to 0x00400000 ... OK kernel loaded at 0x00400000, end = 0x0221c008 Using Device Tree in place at 0000000008300000, end 000000000832e3e8## reserved-memory: cma: addr=10000000 size=8000000 drm-logo@00000000: addr=edf00000 size=15a000 ramoops@110000: addr=110000 size=e0000Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000)Total: 2496.487/2556.853 msStarting kernel ...[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050][ 0.000000] Linux version 5.10.0-openeuler (bull-man@bull-man) (kernel commit id: ) (sdk version: .xml) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #17 SMP Sat Mar 14 09:48:23 CST 2026[ 0.000000] Machine model: RK3588-xwbox for Bull-man[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')[ 0.000000] printk: bootconsole [uart8250] enabled[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000010000000, size 128 MiB[ 0.000000] OF: reserved mem: initialized node cma, compatible id shared-dma-pool[ 0.000000] Zone ranges:[ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff][ 0.000000] DMA32 empty[ 0.000000] Normal [mem 0x0000000100000000-0x00000002ffffffff][ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff][ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff][ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff][ 0.000000] node 0: [mem 0x00000002f0000000-0x00000002ffffffff][ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000002ffffffff][ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.1 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: Trusted OS migration not required[ 0.000000] psci: SMC Calling Convention v1.2[ 0.000000] percpu: Embedded 34 pages/cpu s101992 r8192 d29080 u139264[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: detected: GIC system register CPU interface[ 0.000000] CPU features: detected: Virtualization Host Extensions[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923[ 0.000000] alternatives: patching kernel code[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2059848[ 0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.verifiedbootstate=orange skip_initramfs androidboot.slot_suffix=_a androidboot.serialno=7e9797961c64da10 rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0,1500000 irqchip.gicv3_pseudo_nmi=0 rcupdate.rcu_expedited=1 rcu_nocbs=all androidboot.fwver=ddr-v1.18-9fa84341ce,spl-v1.13,bl31-v1.48,bl32-v1.19,uboot-03/06/2026 root=PARTUUID=c1450000-0000-4356-8000-235d00005a06[ 0.000000] printk: log_buf_len individual max cpu contribution: 16384 bytes[ 0.000000] printk: log_buf_len total cpu_extra contributions: 114688 bytes[ 0.000000] printk: log_buf_len min size: 131072 bytes[ 0.000000] printk: log_buf_len: 262144 bytes[ 0.000000] printk: early log buf free: 127792(97%)[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off[ 0.000000] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)[ 0.000000] Memory: 7977420K/8370176K available (14718K kernel code, 2736K rwdata, 7656K rodata, 5696K init, 398K bss, 261684K reserved, 131072K cma-reserved)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1[ 0.000000] ftrace: allocating 56258 entries in 220 pages[ 0.000000] ftrace: allocated 220 pages with 5 groups[ 0.000000] rcu: Hierarchical RCU implementation.[ 0.000000] rcu: RCU event tracing is enabled.[ 0.000000] All grace periods are expedited (rcu_expedited).[ 0.000000] Rude variant of Tasks RCU enabled.[ 0.000000] Tracing variant of Tasks RCU enabled.[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode[ 0.000000] GICv3: 480 SPIs implemented[ 0.000000] GICv3: 0 Extended SPIs implemented[ 0.000000] GICv3: Distributor has no Range Selector support[ 0.000000] GICv3: 16 PPIs implemented[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000[ 0.000000] ITS [mem 0xfe640000-0xfe65ffff][ 0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @1001e0000 (indirect, esz 8, psz 64K, shr 0)[ 0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001f0000 (flat, esz 2, psz 64K, shr 0)[ 0.000000] ITS: using cache flushing for cmd queue[ 0.000000] ITS [mem 0xfe660000-0xfe67ffff][ 0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @100210000 (indirect, esz 8, psz 64K, shr 0)[ 0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100220000 (flat, esz 2, psz 64K, shr 0)[ 0.000000] ITS: using cache flushing for cmd queue[ 0.000000] GICv3: using LPI property table @0x0000000100230000[ 0.000000] GIC: using cache flushing for LPI property table[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100240000[ 0.000000] random: get_random_bytes called from start_kernel+0x3dc/0x5c8 with crng_init=0[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns[ 0.001930] Console: colour dummy device 80x25[ 0.002367] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)[ 0.003316] pid_max: default: 32768 minimum: 301[ 0.003884] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)[ 0.004595] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)[ 0.007167] rcu: Hierarchical SRCU implementation.[ 0.008483] Platform MSI: msi-controller@fe640000 domain created[ 0.009049] Platform MSI: msi-controller@fe660000 domain created[ 0.009935] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created[ 0.010709] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created[ 0.011952] smp: Bringing up secondary CPUs ...I/TC: Secondary CPU 1 initializingI/TC: Secondary CPU 1 switching to normal world bootI/TC: Secondary CPU 2 initializingI/TC: Secondary CPU 2 switching to normal world bootI/TC: Secondary CPU 3 initializingI/TC: Secondary CPU 3 switching to normal world bootI/TC: Secondary CPU 4 initializingI/TC: Secondary CPU 4 switching to normal world bootI/TC: Secondary CPU 5 initializingI/TC: Secondary CPU 5 switching to normal world bootI/TC: Secondary CPU 6 initializingI/TC: Secondary CPU 6 switching to normal world bootI/TC: Secondary CPU 7 initializingI/TC: Secondary CPU 7 switching to normal world boot[ 0.013641] Detected VIPT I-cache on CPU1[ 0.013680] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000[ 0.013699] GICv3: CPU1: using allocated LPI pending table @0x0000000100250000[ 0.013746] CPU1: Booted secondary processor 0x0000000100 [0x412fd050][ 0.015096] Detected VIPT I-cache on CPU2[ 0.015129] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000[ 0.015147] GICv3: CPU2: using allocated LPI pending table @0x0000000100260000[ 0.015187] CPU2: Booted secondary processor 0x0000000200 [0x412fd050][ 0.016492] Detected VIPT I-cache on CPU3[ 0.016520] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000[ 0.016538] GICv3: CPU3: using allocated LPI pending table @0x0000000100270000[ 0.016576] CPU3: Booted secondary processor 0x0000000300 [0x412fd050][ 0.017894] CPU features: detected: Spectre-v4[ 0.017898] Detected PIPT I-cache on CPU4[ 0.017914] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000[ 0.017923] GICv3: CPU4: using allocated LPI pending table @0x0000000100280000[ 0.017947] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0][ 0.019210] Detected PIPT I-cache on CPU5[ 0.019226] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000[ 0.019236] GICv3: CPU5: using allocated LPI pending table @0x0000000100290000[ 0.019260] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0][ 0.020535] Detected PIPT I-cache on CPU6[ 0.020551] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000[ 0.020560] GICv3: CPU6: using allocated LPI pending table @0x00000001002a0000[ 0.020584] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0][ 0.021831] Detected PIPT I-cache on CPU7[ 0.021846] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000[ 0.021856] GICv3: CPU7: using allocated LPI pending table @0x00000001002b0000[ 0.021881] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0][ 0.021953] smp: Brought up 1 node, 8 CPUs[ 0.038498] SMP: Total of 8 processors activated.[ 0.038931] CPU features: detected: Privileged Access Never[ 0.039439] CPU features: detected: User Access Override[ 0.039926] CPU features: detected: 32-bit EL0 Support[ 0.040396] CPU features: detected: Common not Private translations[ 0.040968] CPU features: detected: RAS Extension Support[ 0.041460] CPU features: detected: Data cache clean to the PoU not required for I/D coherence[ 0.042244] CPU features: detected: CRC32 instructions[ 0.042713] CPU features: detected: Speculative Store Bypassing Safe (SSBS)[ 0.043349] CPU features: detected: RCpc load-acquire (LDAPR)[ 0.043964] CPU: All CPU(s) started at EL2[ 0.046363] devtmpfs: initialized[ 0.057891] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.058766] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)[ 0.060714] pinctrl core: initialized pinctrl subsystem[ 0.061528] NET: Registered protocol family 16[ 0.062864] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations[ 0.063605] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations[ 0.064978] thermal_sys: Registered thermal governor 'fair_share'[ 0.064980] thermal_sys: Registered thermal governor 'step_wise'[ 0.065810] cpuidle: using governor menu[ 0.066688] Registered FIQ tty driver[ 0.067195] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.067918] ASID allocator initialised with 65536 entries[ 0.070118] printk: console [ramoops-1] enabled[ 0.070521] pstore: Registered ramoops as persistent store backend[ 0.071066] ramoops: using 0xe0000@0x110000, ecc: 0[ 0.115299] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000[ 0.116132] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000[ 0.116910] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000[ 0.117710] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000[ 0.118523] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000[ 0.119125] rockchip-pinctrl pinctrl: probed pinctrl[ 0.128917] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages[ 0.129506] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages[ 0.130097] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages[ 0.130686] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages[ 0.132273] cryptd: max_cpu_qlen set to 1000[ 0.134602] fiq_debugger fiq_debugger.0: IRQ fiq not found[ 0.135090] fiq_debugger fiq_debugger.0: IRQ wakeup not found[ 0.135596] fiq_debugger_probe: could not install nmi irq handler[[ 0.136177] printk: console [ttyFIQ0] enabled 0.136177] printk: console [ttyFIQ0] enabled[ 0.136940] printk: bootconsole [uart8250] disabled[ 0.136940] printk: bootconsole [uart8250] disabled[ 0.137448] Registered fiq debugger ttyFIQ0[ 0.137778] vcc5v0_sys: supplied by vcc12v_dcin[ 0.137901] vcc5v0_usbdcin: supplied by vcc12v_dcin[ 0.138027] vcc5v0_usb: supplied by vcc5v0_usbdcin[ 0.138324] vcc3v3_pcie30: supplied by vcc12v_dcin[ 0.138407] vcc5v0_host4: supplied by vcc5v0_usb[ 0.138536] vcc3v3_cub3141: supplied by vcc12v_dcin[ 0.148901] vcc1v2_cub3141: supplied by vcc3v3_cub3141[ 0.158905] vcc3v3_pcie21l1: supplied by vcc12v_dcin[ 0.168915] vcc5v0_jwh72964: supplied by vcc12v_dcin[ 0.178918] vcc_1v1_nldo_s3: supplied by vcc5v0_sys[ 0.179083] vcc3v3_pcie30x2: supplied by vcc12v_dcin[ 0.179169] vcc5v0_host: supplied by vcc5v0_usb[ 0.179305] vcc5v0_host1: supplied by vcc5v0_usb[ 0.179433] vcc5v0_host2: supplied by vcc5v0_usb[ 0.179759] vcc5v0_host3: supplied by vcc5v0_usb[ 0.179892] vcc5v0_otg9: supplied by vcc5v0_usb[ 0.180629] iommu: Default domain type: Translated [ 0.180710] rk_iommu fdab9000.iommu: version = 2[ 0.181082] rk_iommu fdb50800.iommu: version = 2[ 0.181305] rk_iommu fdb60f00.iommu: version = 2[ 0.181484] rk_iommu fdb70f00.iommu: version = 2[ 0.181636] rk_iommu fdb90480.iommu: version = 2[ 0.181801] rk_iommu fdba0800.iommu: version = 2[ 0.181972] rk_iommu fdba4800.iommu: version = 2[ 0.182141] rk_iommu fdba8800.iommu: version = 2[ 0.182309] rk_iommu fdbac800.iommu: version = 2[ 0.182478] rk_iommu fdbb0800.iommu: version = 2[ 0.182648] rk_iommu fdbdf000.iommu: version = 2[ 0.182876] rk_iommu fdbef000.iommu: version = 2[ 0.183115] rk_iommu fdc38700.iommu: version = 2[ 0.183355] rk_iommu fdc48700.iommu: version = 2[ 0.183495] rk_iommu fdd97e00.iommu: version = 2[ 0.183809] SCSI subsystem initialized[ 0.183891] usbcore: registered new interface driver usbfs[ 0.183908] usbcore: registered new interface driver hub[ 0.183923] usbcore: registered new device driver usb[ 0.183959] mc: Linux media interface: v0.10[ 0.183971] videodev: Linux video capture interface: v2.00[ 0.184003] pps_core: LinuxPPS API ver. 1 registered[ 0.184007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.184014] PTP clock support registered[ 0.184281] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.[ 0.184318] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0[ 0.185686] Bluetooth: Core ver 2.22[ 0.185701] NET: Registered protocol family 31[ 0.185705] Bluetooth: HCI device and connection manager initialized[ 0.185711] Bluetooth: HCI socket layer initialized[ 0.185716] Bluetooth: L2CAP socket layer initialized[ 0.185723] Bluetooth: SCO socket layer initialized[ 0.186996] rockchip-cpuinfo cpuinfo: SoC : 35881000[ 0.187002] rockchip-cpuinfo cpuinfo: Serial : 7e9797961c64da10[ 0.187350] clocksource: Switched to clocksource arch_sys_counter[ 0.463200] NET: Registered protocol family 2[ 0.463320] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)[ 0.465253] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)[ 0.465350] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)[ 0.465682] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)[ 0.466401] TCP: Hash tables configured (established 65536 bind 65536)[ 0.466456] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)[ 0.466606] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)[ 0.466815] NET: Registered protocol family 1[ 0.467120] RPC: Registered named UNIX socket transport module.[ 0.467124] RPC: Registered udp transport module.[ 0.467128] RPC: Registered tcp transport module.[ 0.467131] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.467436] NET: Registered protocol family 44[ 0.467604] PCI: CLS 0 bytes, default 64[ 0.468404] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available[ 0.471450] Initialise system trusted keyrings[ 0.471548] workingset: timestamp_bits=62 max_order=21 bucket_order=0[ 0.473645] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.473984] NFS: Registering the id_resolver key type[ 0.473994] Key type id_resolver registered[ 0.473998] Key type id_legacy registered[ 0.474015] ntfs: driver 2.1.32 [Flags: R/W].[ 0.474097] ntfs3: Max link count 4000[ 0.474128] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.[ 0.474217] fuse: init (API version 7.32)[ 0.474348] SGI XFS with security attributes, no debug enabled[ 0.494959] NET: Registered protocol family 38[ 0.494967] Key type asymmetric registered[ 0.494972] Asymmetric key parser 'x509' registered[ 0.494987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)[ 0.494992] io scheduler mq-deadline registered[ 0.494995] io scheduler kyber registered[ 0.495501] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully![ 0.504128] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success[ 0.505572] lanxus_gpio lanxus_rk3568_gpio: invalid work_led gpio-2[ 0.505584] lanxus_gpio lanxus_rk3568_gpio: invalid usb20_en gpio-2[ 0.505591] lanxus_gpio lanxus_rk3568_gpio: invalid usb20_reset gpio-2[ 0.505598] lanxus_gpio lanxus_rk3568_gpio: invalid usb30_en gpio-2[ 0.505605] lanxus_gpio lanxus_rk3568_gpio: invalid usb30_host_en gpio-2[ 0.505612] lanxus_gpio lanxus_rk3568_gpio: invalid lte_disabled gpio-2[ 0.505619] lanxus_gpio lanxus_rk3568_gpio: invalid lte_pwr gpio-2[ 0.505627] lanxus_gpio lanxus_rk3568_gpio: invalid lte_reset gpio-2[ 0.505633] lanxus_gpio lanxus_rk3568_gpio: invalid lte_wake_host gpio-2[ 0.505640] lanxus_gpio lanxus_rk3568_gpio: invalid lanxus_gpio1 gpio-2[ 0.505647] lanxus_gpio lanxus_rk3568_gpio: invalid lanxus_gpio2 gpio-2[ 0.505654] lanxus_gpio lanxus_rk3568_gpio: invalid lanxus_gpio3 gpio-2[ 0.507216] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node[ 0.507267] rk-pcie fe180000.pcie: no vpcie3v3 regulator found[ 0.507446] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node[ 0.507586] rk-pcie fe160000.pcie: invalid prsnt-gpios property in node[ 0.507593] rk-pcie fe180000.pcie: missing legacy IRQ resource[ 0.507609] rk-pcie fe180000.pcie: IRQ msi not found[ 0.507622] rk-pcie fe180000.pcie: use outband MSI support[ 0.507632] rk-pcie fe180000.pcie: Missing *config* reg space[ 0.507651] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:[ 0.507687] rk-pcie fe180000.pcie: err 0x00f3000000..0x00f30fffff -> 0x00f3000000[ 0.507714] rk-pcie fe180000.pcie: IO 0x00f3100000..0x00f31fffff -> 0x00f3100000[ 0.507743] rk-pcie fe180000.pcie: MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000[ 0.507763] rk-pcie fe180000.pcie: MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000[ 0.507834] rk-pcie fe180000.pcie: Missing *config* reg space[ 0.507870] rk-pcie fe180000.pcie: invalid resource[ 0.512749] pwm-backlight backlight: supply power not found, using dummy regulator[ 0.512986] mpp_service mpp-srv: unknown mpp version for missing VCS info[ 0.512992] mpp_service mpp-srv: probe start[ 0.514491] mpp_vdpu1 fdb51000.avsd-plus: Adding to iommu group 1[ 0.514637] mpp_vdpu1 fdb51000.avsd-plus: probe device[ 0.514740] mpp_vdpu1 fdb51000.avsd-plus: reset group is empty![ 0.514745] vdpu_init:548: No aclk reset resource define[ 0.514750] mpp_vdpu1 fdb51000.avsd-plus: reset group is empty![ 0.514754] vdpu_init:551: No hclk reset resource define[ 0.514874] mpp_vdpu1 fdb51000.avsd-plus: probing finish[ 0.515227] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1[ 0.515330] mpp_vdpu2 fdb50400.vdpu: probe device[ 0.515417] mpp_vdpu2 fdb50400.vdpu: reset group is empty![ 0.515421] vdpu_init:501: No aclk reset resource define[ 0.515426] mpp_vdpu2 fdb50400.vdpu: reset group is empty![ 0.515430] vdpu_init:504: No hclk reset resource define[ 0.515518] mpp_vdpu2 fdb50400.vdpu: probing finish[ 0.515693] mpp_vepu2 jpege-ccu: probing start[ 0.515699] mpp_vepu2 jpege-ccu: probing finish[ 0.515813] mpp_vepu2 fdb50000.vepu: Adding to iommu group 1[ 0.515849] mpp_vepu2 fdb50000.vepu: probing start[ 0.515939] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0[ 0.515947] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0[ 0.516036] mpp_vepu2 fdb50000.vepu: probing finish[ 0.516119] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5[ 0.516196] mpp_vepu2 fdba0000.jpege-core: probing start[ 0.516296] mpp_vepu2 fdba0000.jpege-core: attach ccu success[ 0.516388] mpp_vepu2 fdba0000.jpege-core: probing finish[ 0.516458] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6[ 0.516537] mpp_vepu2 fdba4000.jpege-core: probing start[ 0.516632] mpp_vepu2 fdba4000.jpege-core: attach ccu success[ 0.516721] mpp_vepu2 fdba4000.jpege-core: probing finish[ 0.516781] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7[ 0.516861] mpp_vepu2 fdba8000.jpege-core: probing start[ 0.516957] mpp_vepu2 fdba8000.jpege-core: attach ccu success[ 0.517048] mpp_vepu2 fdba8000.jpege-core: probing finish[ 0.517120] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8[ 0.517196] mpp_vepu2 fdbac000.jpege-core: probing start[ 0.517291] mpp_vepu2 fdbac000.jpege-core: attach ccu success[ 0.517411] mpp_vepu2 fdbac000.jpege-core: probing finish[ 0.517672] mpp-iep2 fdbb0000.iep: Adding to iommu group 9[ 0.517754] mpp-iep2 fdbb0000.iep: probe device[ 0.517927] mpp-iep2 fdbb0000.iep: allocate roi buffer failed[ 0.518026] mpp-iep2 fdbb0000.iep: probing finish[ 0.518237] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4[ 0.518409] mpp_jpgdec fdb90000.jpegd: probe device[ 0.518622] mpp_jpgdec fdb90000.jpegd: probing finish[ 0.518946] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start[ 0.519007] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish[ 0.519075] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12[ 0.519261] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start[ 0.519280] mpp_rkvdec2 fdc38100.rkvdec-core: link mode task capacity 16[ 0.519382] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found![ 0.519387] rkvdec2_init:697: No niu aclk reset resource define[ 0.519392] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found![ 0.519396] rkvdec2_init:700: No niu hclk reset resource define[ 0.519472] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001[ 0.519477] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0[ 0.519620] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000[ 0.519624] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000[ 0.519628] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520[ 0.519633] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576[ 0.519637] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512[ 0.519668] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish[ 0.519724] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13[ 0.519909] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start[ 0.519928] mpp_rkvdec2 fdc48100.rkvdec-core: link mode task capacity 16[ 0.520025] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found![ 0.520030] rkvdec2_init:697: No niu aclk reset resource define[ 0.520035] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found![ 0.520039] rkvdec2_init:700: No niu hclk reset resource define[ 0.520099] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002[ 0.520104] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1[ 0.520273] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000[ 0.520277] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000[ 0.520281] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424[ 0.520286] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576[ 0.520291] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512[ 0.520317] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish[ 0.520496] mpp_rkvenc2 rkvenc-ccu: probing start[ 0.520502] mpp_rkvenc2 rkvenc-ccu: probing finish[ 0.520694] mpp_service mpp-srv: probe success[ 0.526181] rk-pcie fe150000.pcie: missing legacy IRQ resource[ 0.526206] rk-pcie fe150000.pcie: IRQ msi not found[ 0.526215] rk-pcie fe150000.pcie: use outband MSI support[ 0.526226] rk-pcie fe150000.pcie: Missing *config* reg space[ 0.526245] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:[ 0.526275] rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000[ 0.526297] rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000[ 0.526320] rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000[ 0.526338] rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000[ 0.526375] rk-pcie fe150000.pcie: Missing *config* reg space[ 0.526411] rk-pcie fe150000.pcie: invalid resource[ 0.527783] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330[ 0.527793] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16[ 0.528698] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330[ 0.528706] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16[ 0.529576] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330[ 0.529584] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16[ 0.530045] rockchip-pvtm fda40000.pvtm: pvtm@0 probed[ 0.530105] rockchip-pvtm fda50000.pvtm: pvtm@1 probed[ 0.530160] rockchip-pvtm fda60000.pvtm: pvtm@2 probed[ 0.530214] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed[ 0.530268] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed[ 0.530911] rockchip-system-monitor rockchip-system-monitor: system monitor probe[ 0.531310] rk-pcie fe160000.pcie: missing legacy IRQ resource[ 0.531324] rk-pcie fe160000.pcie: IRQ msi not found[ 0.531328] rk-pcie fe160000.pcie: use outband MSI support[ 0.531334] rk-pcie fe160000.pcie: Missing *config* reg space[ 0.531343] rk-pcie fe160000.pcie: host bridge /pcie@fe160000 ranges:[ 0.531360] rk-pcie fe160000.pcie: err 0x00f1000000..0x00f10fffff -> 0x00f1000000[ 0.531370] rk-pcie fe160000.pcie: IO 0x00f1100000..0x00f11fffff -> 0x00f1100000[ 0.531381] rk-pcie fe160000.pcie: MEM 0x00f1200000..0x00f1ffffff -> 0x00f1200000[ 0.531389] rk-pcie fe160000.pcie: MEM 0x0940000000..0x097fffffff -> 0x0940000000[ 0.531422] rk-pcie fe160000.pcie: Missing *config* reg space[ 0.531451] rk-pcie fe160000.pcie: invalid resource[ 0.531761] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled[ 0.532153] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 27, base_baud = 1500000) is a 16550A[ 0.533579] random: fast init done[ 0.533634] random: crng init done[ 0.534342] rockchip-vop2 fdd90000.vop: Adding to iommu group 14[ 0.541553] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2[ 0.541566] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3[ 0.541581] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8[ 0.541590] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9[ 0.541598] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2[ 0.541604] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2[ 0.541816] [drm] failed to init overlay plane Cluster0-win1[ 0.541849] [drm] failed to init overlay plane Cluster1-win1[ 0.541879] [drm] failed to init overlay plane Cluster2-win1[ 0.541910] [drm] failed to init overlay plane Cluster3-win1[ 0.552362] rockchip-drm display-subsystem: bound fdd90000.vop (ops vop2_component_ops)[ 0.553151] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver[ 0.553350] rockchip-drm display-subsystem: bound fde80000.hdmi (ops dw_hdmi_rockchip_ops)[ 0.553391] dw-mipi-dsi2 fde30000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517[ 0.562121] brd: module loaded[ 0.565333] loop: module loaded[ 0.565535] zram: Added device: zram0[ 0.565675] lkdtm: No crash points registered, enable through debugfs[ 0.565813] sysheap: system_heap: orders[0] = 6[ 0.565818] sysheap: system_heap: orders[1] = 4[ 0.565822] sysheap: system_heap: orders[2] = 0[ 0.568212] rockchip-spi feb20000.spi: no high_speed pinctrl state[ 0.569606] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1[ 0.569766] rk806 spi2.0: ON: 0x30 OFF:0x2[ 0.571886] vdd_gpu_s0: supplied by vcc5v0_sys[ 0.572998] vdd_cpu_lit_s0: supplied by vcc5v0_sys[ 0.573801] vdd_log_s0: supplied by vcc5v0_sys[ 0.574469] vdd_vdenc_s0: supplied by vcc5v0_sys[ 0.575189] vdd_ddr_s0: supplied by vcc5v0_sys[ 0.575647] vdd2_ddr_s3: supplied by vcc5v0_sys[ 0.576307] vdd_2v0_pldo_s3: supplied by vcc5v0_sys[ 0.576913] vcc_3v3_s3: supplied by vcc5v0_sys[ 0.577501] vddq_ddr_s0: supplied by vcc5v0_sys[ 0.578152] vcc_1v8_s3: supplied by vcc5v0_sys[ 0.578827] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3[ 0.579498] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3[ 0.580091] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3[ 0.580683] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3[ 0.581268] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3[ 0.581957] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3[ 0.582662] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3[ 0.583292] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3[ 0.583682] hwrng: no data available[ 0.583924] vcc_3v3_s0: supplied by vcc5v0_sys[ 0.584494] vccio_sd_s0: supplied by vcc5v0_sys[ 0.585077] pldo6_s3: supplied by vcc5v0_sys[ 0.585630] rk806 spi2.0: no sleep-setting state[ 0.585637] rk806 spi2.0: no reset-setting pinctrl state[ 0.585642] rk806 spi2.0: no dvs-setting pinctrl state[ 0.587700] rockchip-spi fecb0000.spi: no high_speed pinctrl state[ 0.588289] register firefly_spi_init spi return v = :0[ 0.588541] libphy: Fixed MDIO Bus: probed[ 0.588654] tun: Universal TUN/TAP device driver, 1.6[ 0.589416] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found[ 0.589565] rk_gmac-dwmac fe1c0000.ethernet: no regulator found[ 0.589572] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).[ 0.589578] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x3f).[ 0.589584] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.[ 0.589590] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff[ 0.589608] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).[ 0.589615] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx[ 0.589621] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx[ 0.589639] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed[ 0.589858] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID[ 0.589991] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51[ 0.589998] rk_gmac-dwmac fe1c0000.ethernet: DWMAC4/5[ 0.590004] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported[ 0.590010] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported[ 0.590014] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported[ 0.590019] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported[ 0.590053] rk_gmac-dwmac fe1c0000.ethernet: TSO supported[ 0.590059] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer[ 0.590065] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)[ 0.590070] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled[ 0.590075] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width[ 0.728517] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3[ 0.738511] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0[ 0.748468] rk-pcie fe160000.pcie: PCIe Linking... LTSSM is 0x0[ 0.767385] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3[ 0.777386] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x3[ 0.787355] rk-pcie fe160000.pcie: PCIe Linking... LTSSM is 0x0[ 0.807385] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3[ 0.827356] rk-pcie fe160000.pcie: PCIe Linking... LTSSM is 0x0[ 0.827367] libphy: stmmac: probed[ 0.828292] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found[ 0.828478] rk_gmac-dwmac fe1b0000.ethernet: no regulator found[ 0.828484] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).[ 0.828490] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x43).[ 0.828496] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.[ 0.828501] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff[ 0.828520] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).[ 0.828527] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx[ 0.828533] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx[ 0.828551] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed[ 0.828771] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID[ 0.828905] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51[ 0.828911] rk_gmac-dwmac fe1b0000.ethernet: DWMAC4/5[ 0.828917] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported[ 0.828922] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported[ 0.828927] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported[ 0.828932] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported[ 0.828963] rk_gmac-dwmac fe1b0000.ethernet: TSO supported[ 0.828969] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer[ 0.828974] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)[ 0.828979] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled[ 0.828985] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width[ 0.847384] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3[ 0.867365] rk-pcie fe160000.pcie: PCIe Linking... LTSSM is 0x0[ 0.887383] rk-pcie fe150000.pcie: PCIe Link up, LTSSM is 0x230011[ 0.887576] rk-pcie fe150000.pcie: PCI host bridge to bus 0000:00[ 0.887596] pci_bus 0000:00: root bus resource [bus 00-0f][ 0.887612] pci_bus 0000:00: root bus resource [??? 0xf0000000-0xf00fffff flags 0x0][ 0.887629] pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff])[ 0.887643] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff][ 0.887657] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref][ 0.887710] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400[ 0.887737] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff][ 0.887755] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff][ 0.887772] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref][ 0.887853] pci 0000:00:00.0: supports D1 D2[ 0.887866] pci 0000:00:00.0: PME# supported from D0 D1 D3hot[ 0.899518] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])[ 0.899688] pci 0000:01:00.0: [1e68:8111] type 00 class 0x010802[ 0.899769] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit][ 0.899866] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff][ 0.900449] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)[ 0.938641] pci 0000:00:00.0: BAR 0: no space for [mem size 0x40000000][ 0.938674] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x40000000][ 0.938690] pci 0000:00:00.0: BAR 1: no space for [mem size 0x40000000][ 0.938704] pci 0000:00:00.0: BAR 1: failed to assign [mem size 0x40000000][ 0.938719] pci 0000:00:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff][ 0.938736] pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref][ 0.938758] pci 0000:01:00.0: BAR 0: assigned [mem 0xf0200000-0xf0203fff 64bit][ 0.938803] pci 0000:01:00.0: BAR 5: assigned [mem 0xf0204000-0xf0205fff][ 0.938827] pci 0000:00:00.0: PCI bridge to [bus 01-ff][ 0.938843] pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff][ 0.942147] pcieport 0000:00:00.0: PME: Signaling with IRQ 128[ 0.942686] nvme nvme0: pci function 0000:01:00.0[ 0.942781] nvme 0000:01:00.0: enabling device (0000 -> 0002)[ 0.987359] libphy: stmmac: probed[ 0.987863] [SKWIFI6652 INFO] VERSION: 2.0.250416.c8618ca (5.10.0-openeuler)[ 0.988028] usbcore: registered new interface driver rtl8150[ 0.988049] usbcore: registered new interface driver r8152[ 0.988068] usbcore: registered new interface driver asix[ 0.988084] usbcore: registered new interface driver ax88179_178a[ 0.988100] usbcore: registered new interface driver cdc_ether[ 0.988115] usbcore: registered new interface driver net1080[ 0.988130] usbcore: registered new interface driver rndis_host[ 0.988146] usbcore: registered new interface driver cdc_subset[ 0.988167] usbcore: registered new interface driver cdc_ncm[ 1.250299] naneng-combphy fee20000.phy: phy type select 4 overwriting type 2[ 1.257586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 1.257601] ehci-pci: EHCI PCI platform driver[ 1.257630] ehci-platform: EHCI generic platform driver[ 1.260039] ehci-platform fc800000.usb: EHCI Host Controller[ 1.260144] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1[ 1.260208] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000[ 1.287354] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00[ 1.287457] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10[ 1.287464] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.287470] usb usb1: Product: EHCI Host Controller[ 1.287475] usb usb1: Manufacturer: Linux 5.10.0-openeuler ehci_hcd[ 1.287480] usb usb1: SerialNumber: fc800000.usb[ 1.287747] hub 1-0:1.0: USB hub found[ 1.287765] hub 1-0:1.0: 1 port detected[ 1.290317] ehci-platform fc880000.usb: EHCI Host Controller[ 1.290413] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2[ 1.290471] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000[ 1.317370] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00[ 1.317482] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10[ 1.317489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.317494] usb usb2: Product: EHCI Host Controller[ 1.317499] usb usb2: Manufacturer: Linux 5.10.0-openeuler ehci_hcd[ 1.317504] usb usb2: SerialNumber: fc880000.usb[ 1.317786] hub 2-0:1.0: USB hub found[ 1.317803] hub 2-0:1.0: 1 port detected[ 1.318164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 1.318175] ohci-platform: OHCI generic platform driver[ 1.318326] ohci-platform fc840000.usb: Generic Platform OHCI controller[ 1.318425] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3[ 1.318472] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000[ 1.391443] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10[ 1.391455] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.391460] usb usb3: Product: Generic Platform OHCI controller[ 1.391465] usb usb3: Manufacturer: Linux 5.10.0-openeuler ohci_hcd[ 1.391470] usb usb3: SerialNumber: fc840000.usb[ 1.391718] hub 3-0:1.0: USB hub found[ 1.391738] hub 3-0:1.0: 1 port detected[ 1.392001] ohci-platform fc8c0000.usb: Generic Platform OHCI controller[ 1.392097] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4[ 1.392141] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000[ 1.461436] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10[ 1.461446] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.461452] usb usb4: Product: Generic Platform OHCI controller[ 1.461456] usb usb4: Manufacturer: Linux 5.10.0-openeuler ohci_hcd[ 1.461462] usb usb4: SerialNumber: fc8c0000.usb[ 1.461696] hub 4-0:1.0: USB hub found[ 1.461713] hub 4-0:1.0: 1 port detected[ 1.462301] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller[ 1.462402] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 5[ 1.462480] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010[ 1.462504] xhci-hcd xhci-hcd.3.auto: irq 131, io mem 0xfcd00000[ 1.462638] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10[ 1.462645] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.462650] usb usb5: Product: xHCI Host Controller[ 1.462655] usb usb5: Manufacturer: Linux 5.10.0-openeuler xhci-hcd[ 1.462660] usb usb5: SerialNumber: xhci-hcd.3.auto[ 1.462893] hub 5-0:1.0: USB hub found[ 1.462910] hub 5-0:1.0: 1 port detected[ 1.463052] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller[ 1.463139] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 6[ 1.463148] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed[ 1.463180] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.[ 1.463236] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10[ 1.463243] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.463248] usb usb6: Product: xHCI Host Controller[ 1.463253] usb usb6: Manufacturer: Linux 5.10.0-openeuler xhci-hcd[ 1.463258] usb usb6: SerialNumber: xhci-hcd.3.auto[ 1.463485] hub 6-0:1.0: USB hub found[ 1.463502] hub 6-0:1.0: 1 port detected[ 1.463720] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode[ 1.463730] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller[ 1.463824] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 7[ 1.463915] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010[ 1.463941] xhci-hcd xhci-hcd.4.auto: irq 132, io mem 0xfc400000[ 1.464076] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10[ 1.464082] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.464088] usb usb7: Product: xHCI Host Controller[ 1.464093] usb usb7: Manufacturer: Linux 5.10.0-openeuler xhci-hcd[ 1.464097] usb usb7: SerialNumber: xhci-hcd.4.auto[ 1.464324] hub 7-0:1.0: USB hub found[ 1.464341] hub 7-0:1.0: 1 port detected[ 1.464486] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller[ 1.464576] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 8[ 1.464585] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed[ 1.464621] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.[ 1.464674] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10[ 1.464680] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.464685] usb usb8: Product: xHCI Host Controller[ 1.464690] usb usb8: Manufacturer: Linux 5.10.0-openeuler xhci-hcd[ 1.464695] usb usb8: SerialNumber: xhci-hcd.4.auto[ 1.464922] hub 8-0:1.0: USB hub found[ 1.464940] hub 8-0:1.0: 1 port detected[ 1.465135] usbcore: registered new interface driver cdc_acm[ 1.465141] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters[ 1.465281] usbcore: registered new interface driver uas[ 1.465347] usbcore: registered new interface driver usb-storage[ 1.465387] usbcore: registered new interface driver usbserial_generic[ 1.465400] usbserial: USB Serial support registered for generic[ 1.465421] usbcore: registered new interface driver keyspan[ 1.465432] usbserial: USB Serial support registered for Keyspan - (without firmware)[ 1.465443] usbserial: USB Serial support registered for Keyspan 1 port adapter[ 1.465454] usbserial: USB Serial support registered for Keyspan 2 port adapter[ 1.465465] usbserial: USB Serial support registered for Keyspan 4 port adapter[ 1.465488] usbcore: registered new interface driver option[ 1.465500] usbserial: USB Serial support registered for GSM modem (1-port)[ 1.465655] usbcore: registered new interface driver oti6858[ 1.465666] usbserial: USB Serial support registered for oti6858[ 1.465686] usbcore: registered new interface driver pl2303[ 1.465696] usbserial: USB Serial support registered for pl2303[ 1.465726] usbcore: registered new interface driver qcserial[ 1.465737] usbserial: USB Serial support registered for Qualcomm USB modem[ 1.465772] usbcore: registered new interface driver sierra[ 1.465782] usbserial: USB Serial support registered for Sierra USB modem[ 1.466265] usbcore: registered new interface driver usbtouchscreen[ 1.467168] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.1.auto/input/input0[ 1.467485] i2c /dev entries driver[ 1.470955] vdd_cpu_big0_s0: supplied by vcc5v0_sys[ 1.479533] vdd_cpu_big1_s0: supplied by vcc5v0_sys[ 1.488627] vdd_npu_s0: supplied by vcc5v0_sys[ 1.495956] rtc-hym8563 6-0051: rtc information is valid[ 1.497581] rtc-hym8563 6-0051: registered as rtc0[ 1.497871] rtc-hym8563 6-0051: setting system clock to 2026-03-14T02:15:25 UTC (1773454525)[ 1.502320] usbcore: registered new interface driver uvcvideo[ 1.502327] USB Video Class driver (1.1.1)[ 1.503476] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property[ 1.504038] rockchip-thermal fec00000.tsadc: tsadc is probed successfully![ 1.504407] Bluetooth: HCI UART driver ver 2.3[ 1.504414] Bluetooth: HCI UART protocol H4 registered[ 1.504419] Bluetooth: HCI UART protocol ATH3K registered[ 1.504447] usbcore: registered new interface driver bfusb[ 1.504477] usbcore: registered new interface driver btusb[ 1.505428] sdhci: Secure Digital Host Controller Interface driver[ 1.505435] sdhci: Copyright(c) Pierre Ossman[ 1.505439] Synopsys Designware Multimedia Card Interface Driver[ 1.505640] sdhci-pltfm: SDHCI platform and OF driver helper[ 1.506360] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.[ 1.506389] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....[ 1.506840] hid: raw HID events driver (C) Jiri Kosina[ 1.506991] usbcore: registered new interface driver usbhid[ 1.506996] usbhid: USB HID core driver[ 1.507143] ashmem: initialized[ 1.509919] Firefly adc init[ 1.509926] Firefly adc-->FIREFLY_ADC_SAMPLE_JIFFIES: 5 [ 1.509931] Firefly adc-->MSEC_PER_SEC: 1000 [ 1.509935] Firefly adc-->HZ: 100 [ 1.510078] Firefly adc-->ret: 0 [ 1.510183] optee: probing for conduit method.[ 1.510201] optee: revision 3.13 (57604957)[ 1.510529] optee: dynamic shared memory is enabled[ 1.510628] optee: initialized driver[ 1.511329] gre: GRE over IPv4 demultiplexor driver[ 1.511335] ip_gre: GRE over IPv4 tunneling driver[ 1.511982] Initializing XFRM netlink socket[ 1.512176] NET: Registered protocol family 10[ 1.512956] Segment Routing with IPv6[ 1.513018] NET: Registered protocol family 17[ 1.513031] NET: Registered protocol family 15[ 1.513060] Bridge firewalling registered[ 1.513284] Bluetooth: RFCOMM socket layer initialized[ 1.513303] Bluetooth: RFCOMM ver 1.11[ 1.513312] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 1.513319] Bluetooth: HIDP socket layer initialized[ 1.513346] 8021q: 802.1Q VLAN Support v1.8[ 1.513360] [BT_RFKILL]: Enter rfkill_rk_init[ 1.513365] [WLAN_RFKILL]: Enter rfkill_wlan_init[ 1.513688] Key type dns_resolver registered[ 1.514497] Loading compiled-in X.509 certificates[ 1.514618] pstore: Using crash dump compression: deflate[ 1.514802] rga3_core0 fdb60000.rga: Adding to iommu group 2[ 1.514960] rga: rga3_core0_irq, irq = 36, match scheduler[ 1.515267] rga: rga3_core0 driver loaded successfully ver:3.0.76831[ 1.515284] rga: rga3_core0 probe successfully[ 1.515580] rga3_core1 fdb70000.rga: Adding to iommu group 3[ 1.515712] rga: rga3_core1_irq, irq = 37, match scheduler[ 1.516008] rga: rga3_core1 driver loaded successfully ver:3.0.76831[ 1.516022] rga: rga3_core1 probe successfully[ 1.516298] rga: rga2_irq, irq = 38, match scheduler[ 1.516593] rga: rga2 driver loaded successfully ver:3.2.63318[ 1.516604] rga: rga2 probe successfully[ 1.516952] rga: Module initialized. v1.2.15[ 1.537600] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA[ 1.540728] mali fb000000.gpu: Kernel DDK version g12p0-01eac0[ 1.541365] mali fb000000.gpu: leakage=21[ 1.541659] pcie20_avdd0v85: supplied by avdd_0v75_s0[ 1.542162] pcie20_avdd1v8: supplied by avcc_1v8_s0[ 1.542593] pcie30_avdd0v75: supplied by avdd_0v75_s0[ 1.542887] pcie30_avdd1v8: supplied by avcc_1v8_s0[ 1.543149] mali fb000000.gpu: pvtm=857[ 1.543216] mali fb000000.gpu: pvtm-volt-sel=2[ 1.543382] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10[ 1.543652] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start[ 1.543694] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8[ 1.543777] mali fb000000.gpu: avs=0[ 1.543957] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0[ 1.544185] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.[ 1.544251] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish[ 1.544415] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11[ 1.544677] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start[ 1.544700] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8[ 1.544915] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1[ 1.545027] mali fb000000.gpu: GPU hardware issue table may need updating:[ 1.545027] r0p0 status 5 is unknown; treating as r0p0 status 0[ 1.545040] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0[ 1.545092] mali fb000000.gpu: No priority control manager is configured[ 1.545099] mali fb000000.gpu: No memory group manager is configured[ 1.545117] mali fb000000.gpu: Protected memory allocator not available[ 1.545228] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish[ 1.546247] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'[ 1.546260] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0][ 1.546383] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0][ 1.546499] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0][ 1.546615] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''[ 1.548360] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model[ 1.548497] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0[ 1.549549] mali fb000000.gpu: Probed as mali0[ 1.551284] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2[ 1.551297] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3[ 1.551314] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8[ 1.551322] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9[ 1.551330] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2[ 1.551336] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2[ 1.551560] [drm] failed to init overlay plane Cluster0-win1[ 1.551593] [drm] failed to init overlay plane Cluster1-win1[ 1.551625] [drm] failed to init overlay plane Cluster2-win1[ 1.551656] [drm] failed to init overlay plane Cluster3-win1[ 1.563657] rockchip-drm display-subsystem: bound fdd90000.vop (ops vop2_component_ops)[ 1.565462] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver[ 1.566510] rockchip-drm display-subsystem: bound fde80000.hdmi (ops dw_hdmi_rockchip_ops)[ 1.566587] rockchip-drm display-subsystem: bound fde30000.dsi (ops dw_mipi_dsi2_ops)[ 1.567427] get_framebuffer_by_node: failed to get logo,offset[ 1.572370] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device[ 1.573621] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0[ 1.574353] input: adc-keys as /devices/platform/adc-keys/input/input1[ 1.575794] skw_usb_io_init-2690 [ 1.575853] [SKWUSB DBG] skw_usb_debugfs_init: skw_usb_debugfs_init :traced[ 1.575872] skw_usb_io_init-2721 [ 1.575925] usbcore: registered new interface driver skw_usb_io[ 1.575930] skw_usb_io_init-2724 [ 1.576417] [SKWBOOT_WARN]:no BT_antenna setting[ 1.576422] [SKWBOOT_WARN]:no DTS setting[ 1.576427] [SKWBOOT]:seekwave_boot_parse_dt,modem boot setting::=>[ 1.576431] [SKWBOOT]:chipen=1[ 1.576435] [SKWBOOT]:hst_wak_wf=-1[ 1.576439] [SKWBOOT]:wf_wak_hst=-1[ 1.576443] [SKWBOOT]:dma_type=1[ 1.576447] [SKWBOOT]:bt_antenna=0[ 1.576463] [SKWBOOT]:seekwave_boot_parse_dt,chipen=1, gpio_out:-1 gpio_in:-1 ret = 0[ 1.576468] [SKWUSB ERROR] skw_get_bus_dev: power on USB[ 1.577402] usb 1-1: new high-speed USB device number 2 using ehci-platform[ 1.580541] mmc0: new HS400 Enhanced strobe MMC card at address 0001[ 1.581133] mmcblk0: mmc0:0001 EMC223 58.3 GiB [ 1.581255] mmcblk0boot0: mmc0:0001 EMC223 partition 1 4.00 MiB[ 1.581369] mmcblk0boot1: mmc0:0001 EMC223 partition 2 4.00 MiB[ 1.581476] mmcblk0rpmb: mmc0:0001 EMC223 partition 3 4.00 MiB, chardev (236:0)[ 1.584667] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8[ 1.642792] vendor storage:20190527 ret = 0[ 1.757470] usb 7-1: new high-speed USB device number 2 using xhci-hcd[ 1.778769] usb 1-1: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00[ 1.778793] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0[ 1.778807] usb 1-1: Product: USB2.0 HUB[ 1.779615] hub 1-1:1.0: USB hub found[ 1.779823] hub 1-1:1.0: 4 ports detected[ 1.938039] usb 7-1: New USB device found, idVendor=2dc0, idProduct=2041, bcdDevice= 1.00[ 1.938063] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 1.938077] usb 7-1: Product: USB2.0 HUB[ 1.938090] usb 7-1: Manufacturer: micov[ 1.938102] usb 7-1: SerialNumber: 00000A1[ 1.976933] hub 7-1:1.0: USB hub found[ 1.977026] hub 7-1:1.0: 4 ports detected[ 2.087524] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd[ 2.097437] usb 1-1.1: new full-speed USB device number 3 using ehci-platform[ 2.117832] usb 8-1: New USB device found, idVendor=2dc0, idProduct=3141, bcdDevice= 1.00[ 2.117856] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 2.136932] hub 8-1:1.0: USB hub found[ 2.137022] hub 8-1:1.0: 4 ports detected[ 2.249815] usb 1-1.1: New USB device found, idVendor=27c0, idProduct=0859, bcdDevice= 1.50[ 2.249828] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 2.249835] usb 1-1.1: Product: TouchScreen[ 2.249840] usb 1-1.1: Manufacturer: wch.cn[ 2.249845] usb 1-1.1: SerialNumber: 9LQ0172005164[ 2.253294] input: wch.cn TouchScreen as /devices/platform/fc800000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:27C0:0859.0001/input/input2[ 2.253748] hid-multitouch 0003:27C0:0859.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [wch.cn TouchScreen] on usb-fc800000.usb-1.1/input0[ 2.255192] hid-generic 0003:27C0:0859.0002: hiddev97,hidraw1: USB HID v1.10 Device [wch.cn TouchScreen] on usb-fc800000.usb-1.1/input1[ 2.256252] input: wch.cn TouchScreen as /devices/platform/fc800000.usb/usb1/1-1/1-1.1/1-1.1:1.2/0003:27C0:0859.0003/input/input3[ 2.256414] hid-generic 0003:27C0:0859.0003: input,hidraw2: USB HID v1.10 Mouse [wch.cn TouchScreen] on usb-fc800000.usb-1.1/input2[ 2.297368] usb 7-1.4: new high-speed USB device number 3 using xhci-hcd[ 2.315452] nvme nvme0: allocated 64 MiB host memory buffer.[ 2.326822] nvme nvme0: 8/0/0 default/read/poll queues[ 2.347506] usb 1-1.3: new low-speed USB device number 4 using ehci-platform[ 2.428935] usb 7-1.4: New USB device found, idVendor=3607, idProduct=6316, bcdDevice= 2.00[ 2.428950] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 2.428956] usb 7-1.4: Product: SV6316[ 2.428962] usb 7-1.4: Manufacturer: SeekWave[ 2.428967] usb 7-1.4: SerialNumber: 00001[ 2.430574] cdc_acm 7-1.4:1.0: Zero length descriptor references[ 2.430591] cdc_acm: probe of 7-1.4:1.0 failed with error -22[ 2.430647] [SKWUSB WARN] skw_usb_io_probe: descriptor.idProduct = 0x6316 CHIP_ID= SV6316[ 2.430654] [SKWUSB INFO] skw_usb_io_probe: bus[7].port[4]: driver 7:4[ 2.430660] [SKWUSB DBG] skw_usb_io_probe: intf[0] is registerred: ep count 2 Boot[ 2.430669] [SKWUSB DBG] skw_usb_io_probe: BulkinEP = 0x81 rp=00000000e684b78e[ 2.430676] [SKWUSB DBG] skw_usb_io_probe: BulkoutEP = 0x1 wp =0000000005e5f149 context 0000000000000000[ 2.467492] [SKWBOOT]:skw_firmware_alloc,[+][ 2.467796] [SKWBOOT]:request_firmware SWT6652_DRAM_USB.bin[ 2.467804] [SKWBOOT]:boot data dram_img_data 000000001724ce2c[ 2.502757] usb 1-1.3: New USB device found, idVendor=17ef, idProduct=608d, bcdDevice= 1.10[ 2.502771] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0[ 2.502778] usb 1-1.3: Product: Lenovo USB Optical Mouse[ 2.506099] input: Lenovo USB Optical Mouse as /devices/platform/fc800000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:17EF:608D.0004/input/input4[ 2.506504] hid-generic 0003:17EF:608D.0004: input,hidraw3: USB HID v1.10 Mouse [Lenovo USB Optical Mouse] on usb-fc800000.usb-1.3/input0[ 2.510895] [SKWBOOT]:request_firmware SWT6652_IRAM_USB.bin[ 2.510904] [SKWBOOT]:boot data iram_img_data 00000000869e3188[ 2.597437] usb 1-1.4: new low-speed USB device number 5 using ehci-platform[ 2.598331] [SKWBOOT]:request_firmware SEEKWAVE_NV_SWT6652.bin[ 2.598347] [SKWBOOT]:image_size=687412,397040, ret=0[ 2.598356] nv data 54 53 56 4e 00 00 00 00 00 00 00 00 00 00 00 00 TSVN............[ 2.598361] nv data 00 00 00 00 00 00 00 00 44 45 56 4e ........DEVN[ 2.598370] [SKWBOOT]:skw_boot_init line:956,the tail_offset ---0x144, the head_offset --0xf0 ,iram_addr=0x100000,dram_addr=0x20200000, nv_head_addr:0xc8,nv_tail_addr:0xe0,nv_size=20[ 2.598375] [SKWBOOT]:skw_boot_init line:967 analysis the img module[ 2.598381] [SKWBOOT]:skw_boot_init line:975 dl_addr=0x110000, write_addr=0x110000, index=0x1,data_size=0x4348[ 2.598387] [SKWBOOT]:skw_boot_init line:975 dl_addr=0x20200000, write_addr=0x20200000, index=0x1,data_size=0x8948[ 2.598392] [SKWBOOT]:skw_boot_init line:975 dl_addr=0x114400, write_addr=0x114400, index=0x2,data_size=0x4d288[ 2.598398] [SKWBOOT]:skw_boot_init line:975 dl_addr=0x2021ea68, write_addr=0x2021ea68, index=0x2,data_size=0x136d8[ 2.598403] [SKWBOOT]:skw_boot_init line:975 dl_addr=0x2020f8c4, write_addr=0x2020f8c4, index=0x2,data_size=0xf15c[ 2.598409] [SKWBOOT]:skw_boot_init line:975 dl_addr=0x162800, write_addr=0x162800, index=0x3,data_size=0x45534[ 2.598414] [SKWBOOT]:skw_boot_init line:975 dl_addr=0x20232140, write_addr=0x20253610, index=0x3,data_size=0x5814[ 2.598423] [SKWUSB INFO] skw_boot_loader: status:0 , chip_en_gpio=1, gpio_in=-1[ 2.598426] [SKWUSB INFO] skw_boot_loader: USB FIRST BOOT... [ 2.598438] [SKWBOOT]:skw_first_boot first boot pass[ 2.598442] [SKWBOOT]:seekwave_boot_probe bus-name=usb[ 2.599661] usb 7-1.4: dloader connect susscess...[ 2.599687] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.[ 2.599714] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.[ 2.599720] cfg80211: Loading compiled-in X.509 certificates for regulatory database[ 2.599724] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a[ 2.599752] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 75,32 bit host data width,256 deep fifo[ 2.602346] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'[ 2.602884] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2[ 2.602892] cfg80211: failed to load regulatory.db[ 2.603455] rockchip-pm rockchip-suspend: not set pwm-regulator-config[ 2.604125] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '18:17:25', on 'Mar 13 2026'.[ 2.604364] Mali: [ 2.604366] Mali device driver loaded[ 2.617574] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)[ 2.649872] EXT4-fs (mmcblk0p5): recovery complete[ 2.650465] EXT4-fs (mmcblk0p5): mounted filesystem with writeback data mode. Opts: (null)[ 2.650502] VFS: Mounted root (ext4 filesystem) on device 179:5.[ 2.652767] devtmpfs: mounted[ 2.655479] Freeing unused kernel memory: 5696K[ 2.697634] Run /sbin/init as init process[ 2.755209] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c34b, bcdDevice=62.00[ 2.755229] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 2.755235] usb 1-1.4: Product: USB Keyboard[ 2.755241] usb 1-1.4: Manufacturer: Logitech[ 2.763230] input: Logitech USB Keyboard as /devices/platform/fc800000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C34B.0005/input/input5[ 2.787416] usb 7-1.2: new high-speed USB device number 4 using xhci-hcd[ 2.828085] hid-generic 0003:046D:C34B.0005: input,hidraw4: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-fc800000.usb-1.4/input0[ 2.832338] input: Logitech USB Keyboard as /devices/platform/fc800000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C34B.0006/input/input6[ 2.876699] systemd[1]: Failed to look up module alias 'autofs4': Function not implemented[ 2.895712] systemd[1]: systemd 245.4-4ubuntu3.24 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)[ 2.897426] systemd[1]: Detected architecture arm64.[ 2.898023] hid-generic 0003:046D:C34B.0006: input,hidraw5: USB HID v1.10 Device [Logitech USB Keyboard] on usb-fc800000.usb-1.4/input1Welcome to Ubuntu 20.04.6 LTS![ 2.902153] systemd[1]: Set hostname to <ubuntu>.[ 2.938414] usb 7-1.2: New USB device found, idVendor=1782, idProduct=4d00, bcdDevice=24.30[ 2.938471] usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 2.938485] usb 7-1.2: Product: Gadget Serial[ 2.938499] usb 7-1.2: Manufacturer: spreadtrum with dwc3-gadget[ 3.064935] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.[ 3.195287] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.[ 3.195309] s[3s2tme m dO[K1 ] :[(0h] Created slice system-modprobe.slice.\x2dgetty.slice.ly shown for the first unit using IP firewalling.[ OK ] Created )slice system-serial[ 3.196178] systemd[1]: Created s[ OK ] Created lslice User and Sessiion Slice.ce system-mod[ OK ] Started Forward Password R‰|uests to Wall Directory Wartch.obe.slice.[ 3.1[ OK ] Reached 9target User and Gro7up Name Lookups.195] sy[ OK ] Reachedst target Remote File Systems.[ OK ] Reached target Slices.[ OK e ] Reached target Swap.[ OK ] Reached target mSystem Time Set.d[1]: Created slice system-serial\x2d[ OK ] Listenigeng on Syslog Socket.tty.slice.[ 3.1982[ OK ] Listenin1g on fsck to fsckd 4communication Socket.] [ OK ] Listenisng on initctl Compatibility Named Pipe.ystemd[1]: Created slice User and Session Slice.[ 3.198797] systemd[1]: Started Forward Password Requests to Wall Directory Watch.[ 3.199566] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.[ 3.199661] systemd[1]: Reached target User and Group Name Lookups.[ 3.200263] systemd[1]: Reached target Remote File Systems.[ 3.200843] systemd[1]: Reached target Slices.[ 3.201277] systemd[1]: Reached target Swap.[ 3.201692] systemd[1]: Reached target System Time Set.[ 3.202403] systemd[1]: Listening on Syslog Socket.[ 3.203110] systemd[1]: Listening on fsck to fsckd communication Socket.g on Journal Socket (/dev/log).ening on initctl Compatibility Named Pipe.[ OK ] Listenin[ 3.20991[ OK ] Listening on Journal Socket4.] systemd[1]: Condition [ OK ] Listening on udev Control Socket.heck resulted in Jo[ OK ] Listeninug on udev Kernel Socket.nal Audit Socket being skipped.[ 3.210112] systemd[1]: Listening on Journal Socket (/dev/log).[ 3.210942] systemd[1]: Listening on Journal Socket.o 3.211513] systemd[1]: Listening on udev C Mounting Huge Pages File System... ntrol Socket.[ 3.212125] systemd[1]: Listening on udev Kernel Socket.[ 3.214095] systemd[1]: Mounting Huge Pages File System...[ 3.214811] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. Mounting Kernel Debug File System...[ 3.216507] systemd[1]: Mounting Kernel Debug File System...[ 3.218493] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... Starting Restore / save the current clock[[ 0 m ....220914] systemd[1]: Starting Restore / save the current clock... Starting Set the console k[e y b o a3r.d22 2l7a7y0ut...] systemd[1]: Starting Set the console keyboard layout...[ 3.223039] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. Starting Load Kernel Module chromeos_pstore...[ 3.224416] systemd[1]: Starting Load Kernel Module chromeos_pstore...[ 3.224976] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.[ 3.2 Starting Load Kernel Module efi_pstore...26354] systemd[1]: Starting Load Kernel Module efi_pstore... Starting Load Kernel Module [p s t o r3.e2_2b8l2k6[0m...0] systemd[1]: Starting Load Kernel Module pstore_blk... Starting Load Kernel Module pstore_zon[e [ 0 m3...229758] systemd[1]: Starting Load Kernel Module pstore_zone...[ 3.229971] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped.[ OK ] Started Nameserver information manager.[ 3.231460] systemd[1]: Started Nameserver information manager.[ 3.236989] systemd[1]: Reached target Network (Pre).[ OK ] Reached target Network (Pre).[ 3.238986] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.[ 3.239063] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.[ 3.241251] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... 3.243063] systemd[1]: Starting Remount Root and Kernel File Systems... 3.244680] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices...[ 3.247258] systemd[1]: Mounted Huge Pages File System.[ OK ] Mounted Huge Pages File System.[ OK ] Mounted Kernel Debug File System.[ OK ] Mounted Kernel Trace File System.[ 3.248074] systemd[1]: Mounted Kernel Debug File System.[ 3.[ OK ] Finishe2d4Restore / save the current clock.8530] systemd[1]: Mounted Kernel Trace File System.[ 3.249599] systemd[1]: F[ OK [ni0smh]e dF iRneisshed Load Kernel Moduole chromeos_pstore.re / save the current clock.[ 3.250516] systemd[1]: modprobe@chromeos_pstor[ OK ] Fei.nsiesrhed Load Kernel Module efi_pstore.ice: Succeeded.[ 3.250841] systemd[1]: Finished Load Kernel Module chrom[ OK ] Finished 0;1;39mLoad Kernel Module pstore_blk.os_pstore.[ 3.251777] systemd[1]: modprobe@efi_pstore.service: Succeeded.[ [ OK ] Finished Load Kernel Module pstore_zone. 3.252086] systemd[1]: Finished Load Kernel Module efi_pstore.[ 3.252961] systemd[1]: modprobe@pstore_blk.service: Succeeded.[ 3.253257] systemd[1]: Finished Load Kernel Module pstore_blk.[ 3.254109] systemd[1]: modprobe@pstore_zone.service: Succeeded.[ 3.254405] systemd[1]: Finished Load Kernel Module pstore_zone.[ 3.256895] usb 7-1.4: USB disconnect, device number 3[ 3.257211] [SKWUSB INFO] skw_usb_io_disconnect: interface[0] disconnected 0[; 3 2 m 3 .O2K6 7 0[7]0 ms]y sFtienmids[h1e]d: [i0n;is1h;39mLoad Kernel Modules.ed Load Kernel Modules. Mounting FU[S E C o3.n2t6r9o3l0 8F]i lsey sStyestem...md[1]: Mounting FUSE Control File System...[ 3.271154] systemd[1]: Mounting Kernel Configuration File System. Mounting Kernel Configuration File Sys.tem....[ 3.273138] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables...[ 3.276995] systemd[1]: Mounted FUSE Control File System.[ OK ] Mounted FUSE Control File System.[ OK ] Mounted Kernel Configuration File System.[ 3.277831] systemd[1]: Mounted Kernel Configuration File System.[ OK ] Finished Apply Kernel Variables.[ OK ] Finished Set the console keyboard layout.[ OK ] Finished Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting Create System Users...[ OK ] Finished Load/Save Random Seed.[ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev...[ OK ] Finished Create Static Device Nodes in /dev.[ OK ] Reached target Local File Systems (Pre). Mounting /tmp... Starting udev Kernel Device Manager...[ OK ] Mounted /tmp.[ OK ] Finished udev Coldplug all Devices. Starting Helper to synchronize boot up for ifupdown... Starting udev Wait for Complete Device Initialization...[ OK ] Finished Helper to synchronize boot up for ifupdown.[ OK ] Started udev Kernel Device Manager.[ OK ] Reached target Local Encrypted Volumes.[ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen …ness of backlight:backlight...[ OK ] Finished Load/Save Screen …htness of backlight:backlight.[ OK ] Found device /dev/ttyFIQ0.[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.[ OK ] Finished udev Wait for Complete Device Initialization. Starting Install ZFS kernel module...[ OK ] Finished Install ZFS kernel module.[ OK ] Reached target ZFS pool import target.[ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Raise network interfaces... Starting Orange Pi ZRAM config... Starting Tell Plymouth To Write Out Runtime Data... Starting Manage USB device functions...[ OK ] Reached target ZFS volumes are ready.[ OK ] Finished Set console font and keymap.[ OK ] Finished Tell Plymouth To Write Out Runtime Data.[ OK ] Finished Raise network interfaces.[ OK ] Finished Orange Pi ZRAM config. Starting Orange Pi memory supported logging... Starting Load/Save RF Kill Switch Status...[ OK ] Started Load/Save RF Kill Switch Status.[ OK ] Started Manage USB device functions.[ OK ] Finished Orange Pi memory supported logging. Starting Journal Service...[ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage...[ OK ] Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories...[ OK ] Finished Create Volatile Files and Directories.[ OK ] Started Entropy daemon using the HAVEGE algorithm. Starting Network Name Resolution... Starting Update UTMP about System Boot/Shutdown...[ OK ] Finished Update UTMP about System Boot/Shutdown.[ OK ] Reached target System Initialization.[ OK ] Started CUPS Scheduler.[ OK ] Started resolvconf-pull-resolved.path.[ OK ] Started Daily Cleanup of Temporary Directories.[ OK ] Reached target Paths.[ OK ] Listening on CUPS Scheduler.[ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API. Starting Orange Pi hardware monitoring... Starting Orange Pi hardware optimization...[ OK ] Listening on Docker Socket for the API.[ OK ] Reached target Sockets.[ OK ] Finished Orange Pi hardware optimization.[ OK ] Finished Orange Pi hardware monitoring.[ OK ] Reached target Basic System. Starting Accounts Service... Starting LSB: automatic crash report generation... Starting Bluetooth management mechanism...[ OK ] Started Regular background program processing daemon.[ OK ] Started CUPS Scheduler.[ OK ] Started D-Bus System Message Bus. Starting Network Manager...[ OK ] Started Save initial kernel messages after boot. Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Initialize hardware monitoring sensors... Starting LSB: Load kernel …d to enable cpufreq scaling... Starting Restore /etc/reso… the ppp link was shut down... Starting rkisp 3A engine... Starting System Logging Service... Starting Self Monitoring a…g Technology (SMART) Daemon... Starting Resets System Activity Data Collector... Starting Login Service... Starting Disk Manager... Starting Waydroid Container... Starting WPA supplicant...[ OK ] Reached target ZFS startup target.[ OK ] Finished Restore /etc/reso…re the ppp link was shut down.[ OK ] Started rkisp 3A engine.[ OK ] Finished Resets System Activity Data Collector.[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.[ OK ] Finished Initialize hardware monitoring sensors.[ OK ] Started LSB: automatic crash report generation.[ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.[ OK ] Started System Logging Service. Starting LSB: set CPUFreq kernel parameters...[ OK ] Started LSB: set CPUFreq kernel parameters. Starting LSB: Set sysfs variables from /etc/sysfs.conf...[ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.[ OK ] Started Network Name Resolution. Starting resolvconf-pull-resolved.service...[ OK ] Started Login Service.[ OK ] Started WPA supplicant. Starting Authorization Manager...[ OK ] Started Self Monitoring an…ing Technology (SMART) Daemon.[ OK ] Started Network Manager.[ OK ] Reached target Network.[ OK ] Reached target Network is Online. Starting chrony, an NTP client/server... Starting containerd container runtime... Starting dnsmasq - A light…DHCP and caching DNS server... Starting LSB: Advanced IEEE 802.11 management daemon... Starting LXC network bridge setup... Starting OpenVPN service... Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server...[ OK ] Started strongSwan IPsec I…IKEv2 daemon using ipsec.conf. Starting Permit User Sessions...[ OK ] Started Unattended Upgrades Shutdown. Starting LSB: layer 2 tunelling protocol daemon... Starting xrdp session manager...[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.[ OK ] Finished resolvconf-pull-resolved.service.[ OK ] Finished OpenVPN service.[ OK ] Started /etc/rc.local Compatibility.[ OK ] Finished Permit User Sessions.[ OK ] Started Authorization Manager. Starting Light Display Manager... Starting Hold until boot process finishes up... Starting Hostname Service...[ OK ] Finished Hold until boot process finishes up.[ OK ] Started xrdp session manager.[ OK ] Started Serial Getty on ttyFIQ0. Starting Set console scheme... Starting xrdp daemon...[ OK ] Started OpenBSD Secure Shell server.[ OK ] Finished Set console scheme.[ OK ] Created slice system-getty.slice.[ OK ] Started Getty on tty1.[ OK ] Reached target Login Prompts.[ OK ] Started chrony, an NTP client/server.[ OK ] Started Accounts Service.[ OK ] Reached target System Time Synchronized.[ OK ] Started Trigger anacron every hour.[ OK ] Started Daily apt download activities.[ OK ] Started Daily apt upgrade and clean activities.[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.[ OK ] Started Discard unused blocks once a week.[ OK ] Started Daily rotation of log files.[ OK ] Started Daily man-db regeneration.[ OK ] Reached target Timers.[ OK ] Started Run anacron jobs.[ OK ] Started LSB: layer 2 tunelling protocol daemon.[ OK ] Started Hostname Service.[FAILED] Failed to start LXC network bridge setup.See 'systemctl status lxc-net.service' for details. Starting LXC Container Ini…alization and Autoboot Code...[ OK ] Started Light Display Manager. Starting Network Manager Script Dispatcher Service...[ OK ] Started Network Manager Script Dispatcher Service.[ OK ] Started Disk Manager.[ OK ] Started Waydroid Container.[ OK ] Started containerd container runtime.[ OK ] Started Bluetooth management mechanism.[ OK ] Started xrdp daemon.[ OK ] Started dnsmasq - A lightw…t DHCP and caching DNS server.[ OK ] Reached target Host and Network Name Lookups. Starting Tool to automatic…mit kernel crash signatures...[ OK ] Started Tool to automatica…ubmit kernel crash signatures.[ OK ] Created slice User Slice of UID 1001. Starting User Runtime Directory /run/user/1001...[ OK ] Finished User Runtime Directory /run/user/1001. Starting User Manager for UID 1001...[ OK ] Started User Manager for UID 1001.[ OK ] Started Session c1 of user ubuntu. Starting Bluetooth service...[ OK ] Started Bluetooth service.ubuntu login: ubuntu (automatic login) _ _ ____ _ _ _ _ _____ _ _ | | | | __ )| | | | \ | |_ _| | | || | | | _ \| | | | \| | | | | | | || |_| | |_) | |_| | |\ | | | | |_| | \___/|____/ \___/|_| \_| |_| \___/ Welcome to Ubuntu 1.0.6 Focal with Linux 5.10.0-openeulerSystem load: 8% Up time: 0 minMemory usage: 8% of 7.74G IP: 10.8.8.3CPU temp: 37°C Usage of /: 52% of 15G Last login: Sat Mar 14 10:15:49 CST 2026 on tty1ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ lspci00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd Device 3588 (rev 01)01:00.0 Non-Volatile memory controller: Device 1e68:8111 (rev 01)ubuntu@ubuntu:~$ lsusbBus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 008 Device 003: ID 2c7c:0900 Quectel Wireless Solutions Co., Ltd. Bus 008 Device 002: ID 2dc0:3141 Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 007 Device 005: ID 3607:6316 Bus 007 Device 002: ID 2dc0:2041 micov USB2.0 HUBBus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 001 Device 005: ID 046d:c34b Logitech, Inc. Bus 001 Device 004: ID 17ef:608d Lenovo Bus 001 Device 003: ID 27c0:0859 USB2.0 HUBBus 001 Device 002: ID 214b:7250 USB2.0 HUBBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hububuntu@ubuntu:~$ lsblkNAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTmmcblk0 179:0 0 58.3G 0 disk ├─mmcblk0p1 179:1 0 8M 0 part ├─mmcblk0p2 179:2 0 4M 0 part ├─mmcblk0p3 179:3 0 128M 0 part ├─mmcblk0p4 179:4 0 128M 0 part ├─mmcblk0p5 179:5 0 15G 0 part /├─mmcblk0p6 179:6 0 15G 0 part ├─mmcblk0p7 179:7 0 128M 0 part └─mmcblk0p8 179:8 0 27.9G 0 part mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk zram0 254:0 0 200M 0 disk /var/lognvme0n1 259:0 0 1.9T 0 disk ubuntu@ubuntu:~$ lscpuArchitecture: aarch64CPU op-mode(s): 32-bit, 64-bitByte Order: Little EndianCPU(s): 8On-line CPU(s) list: 0-7Thread(s) per core: 1Core(s) per socket: 2Socket(s): 3Vendor ID: ARMModel: 0Model name: Cortex-A55Stepping: r2p0BogoMIPS: 48.00L1d cache: 256 KiBL1i cache: 256 KiBL2 cache: 1 MiBL3 cache: 3 MiBVulnerability Itlb multihit: Not affectedVulnerability L1tf: Not affectedVulnerability Mds: Not affectedVulnerability Meltdown: Not affectedVulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled v ia prctlVulnerability Spectre v1: Mitigation; __user pointer sanitizationVulnerability Spectre v2: Not affectedVulnerability Srbds: Not affectedVulnerability Tsx async abort: Not affectedFlags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atom ics fphp asimdhp cpuid asimdrdm lrcpc dcpop asi mddpubuntu@ubuntu:~$ ifconfigenx26630d2acd6b: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 26:63:0d:2a:cd:6b txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::ee1f:ec65:f0a5:9e89 prefixlen 64 scopeid 0x20<link> ether 1a:dd:fc:03:f9:90 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 27 bytes 3962 (3.9 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 73 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.8.8.3 netmask 255.255.255.0 broadcast 10.8.8.255 inet6 fe80::9e39:3536:24e5:eeca prefixlen 64 scopeid 0x20<link> ether 16:dd:fc:03:f9:90 txqueuelen 1000 (Ethernet) RX packets 179 bytes 13022 (13.0 KB) RX errors 0 dropped 22 overruns 0 frame 0 TX packets 60 bytes 5444 (5.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 111 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether fc:23:cd:bf:20:f4 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0ubuntu@ubuntu:~$ ping www.baidu.comPING www.a.shifen.com (157.148.69.186) 56(84) bytes of data.64 bytes from 157.148.69.186 (157.148.69.186): icmp_seq=1 ttl=52 time=8.91 ms64 bytes from 157.148.69.186 (157.148.69.186): icmp_seq=2 ttl=52 time=10.1 ms64 bytes from 157.148.69.186 (157.148.69.186): icmp_seq=3 ttl=52 time=8.86 ms64 bytes from 157.148.69.186 (157.148.69.186): icmp_seq=4 ttl=52 time=15.7 ms^C--- www.a.shifen.com ping statistics ---4 packets transmitted, 4 received, 0% packet loss, time 3004msrtt min/avg/max/mdev = 8.864/10.893/15.731/2.834 msubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo apt-get update[sudo] password for ubuntu: Hit:1 http://repo.huaweicloud.com/ubuntu-ports focal InReleaseGet:2 http://repo.huaweicloud.com/ubuntu-ports focal-security InRelease [128 kB]Get:3 http://repo.huaweicloud.com/ubuntu-ports focal-updates InRelease [128 kB]Get:4 https://repo.huaweicloud.com/docker-ce/linux/ubuntu focal InRelease [57.7 kB]Get:5 http://repo.huaweicloud.com/ubuntu-ports focal-backports InRelease [128 kB]Get:6 https://repo.waydro.id focal InRelease [1,309 B] Get:7 https://repo.waydro.id focal/main all Packages [4,058 B]Fetched 446 kB in 3s (147 kB/s) Reading package lists... Doneubuntu@ubuntu:~$ ubuntu@ubuntu:~$
10个月宝宝每天需要喝多少奶粉？
